FM24C02B is a 2-wire serial EEPROM chip for Antminer S19, S19j and S19jpro hash boards. It comes in PDIP8 package, which provides 2048-bit serial electrically erasable and programmable read-only memory, integrated 5V tol...
2024/5/16
Bitmain Ctrl_C52 control board, the CPU is Xilinx Zynq 7007 chip, and the fan interface is 1*4p. It is suitable for Antminer Z15, D7, S19j Pro, T15, etc.The control board is used in Antminer to collect and process the da...
2024/5/14
The Bitmain Antminer APW12 1215a PSU is designed specifically for cryptocurrency mining. Its input voltage is 200 to 240V, the output voltage is 12 to 15V, and its net weight is 3.6 kg. APW12 12V-15V EMC a version is sui...
2024/5/11
The water cooling kit converts Antminer S19XP air cooling to water cooling, which helps the miner better dissipate heat. It also reduces noise and power consumption, extending the miner's life.The cooling efficiency ...
2024/5/10
Antminer S19j pro no pic is an efficient Bitcoin miner manufactured by Bitmain that uses the SHA-256 algorithm. Its hash rate is 104T, power consumption is 3068W, and power efficiency is 29.5J/TH.However, as a traditiona...
2024/5/10
With its excellent thermal conductivity, the water cooling system is significantly better than the traditional air cooling method, allowing Antminer D7 to dissipate heat faster and more effectively, then miners to have h...
2024/5/10
Bitmain Ctrl_C76 control board version, the main control chip is Amlogic A113D, suitable for Antminer S21, S19K Pro, s19j, s19j pro, S19jPro+ miner models.There are 3 types of fan interfaces on the C76 control board: 4 1...
2024/5/9
The BM1764 chip is an ASIC chip suitable for the Antminer D7 hash board. A single D7 hash board contains 70 BM1764AB chips for efficient mining of Dash coins.Once the BM1764 ASIC chip is damaged, the hash rate will be re...
2024/5/9
PIC16F1704 is an 8-bit processor microcontroller suitable for Antminer S19, T19, S19+, 17 series, 15 series, L3+, and S9 hash boards. Its operating temperature range is -40°C to 85°C. The device is based on the PIC core ...
2024/5/8
Bitmain C87 control board with 1*4p fan interface, suitable for Antminer L7, S19, S19j, S19j Pro+, S19XP, S19A.A control board failure may cause the following fault phenomena: the miner is unable to find the IP, fails to...
2024/5/8