| Unit Price: | $ 39 |
WhatsApp : +8618623251355
Telegram : @zeusmining_presalesPICKit 3.5 programmer is used to read and save the PIC chip data of the hash board, and the PIC chip stores the chip and voltage data of the hashboard. If the PIC chip data of a miner's hash board is damaged or lost, the hash board will not work.
How to reprogram a PIC chip (taking PIC12F1572 as an example) using PICKit 3.5 programmer?
1. First, you need to install the burning driver on your computer: MPLABX-v3.10-windows-installer.exe
After installation, it will look as the following picture:
2. Set MPLAB IPE V3.10, as shown in the figure below, select PIC12F1572 as Device, and then click Apply.
3. Click File→Import→Hex to find the program storage disk.
4. Select the corresponding program, open it and enter the next interface, and then select Setting→advanced mode.
5. Enter the password microchip to enter the advanced settings.
6. Click Power→VDD voltage to select 3.3V→check Power target circuit from Tool ✔→click Operate to enter the next interface.
7. Make sure that the data serial port of the PICKit 3.5 programmer is properly connected to the computer.
8. PICKit 3.5 programmer is directly connected to the P1 position of the hash board, and the direction 
on the PICKit 3.5 programmer is aligned with the P1 square hole (as shown in the picture). Note that the hash board does not need to be powered up at this point.
9. Click Connect, the MPLAB IPE warning check appears, then click OK.
10. Click Program to start burning.
11. Click Read to view the burning information.
Notice:
(1) The voltage of the PIC16F1704 chip needs to be adjusted to 3.3V for programming.
(2) The voltage of the PIC16F1705 chip needs to be adjusted to 4.8V for programming.
(3) The voltage of the PIC12F1572 chip needs to be adjusted to 3.3V for programming.
(4) When programming the next PCBA continuously, connect the PICKit 3.5 programmer to the hash board correctly and click Program to start programming.
Payment method:
How to determine product prices and shipping costs?When you are ready to buy one or more products. You can consult the sales Manager to get a sample of the proforma invoice. The category, product price, and freight are included. |
||
How to complete the payment?We have the following payment methods. You can tell our sales Manager which payment you prefer and complete it. After the customer service checks and confirms the payment is completed. Provide the proforma invoice. And we will prepare to ship. |
||
Cryptocurrency Payment |
||
 |
Bitcoin - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
USDT - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
ETH - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
LTC - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
USDC - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
Bank Transfer |
||
 |
Wire transfer - USD - SeaTree Card Number |
|
|
Wire transfer - USD, EUR, GBP, HKD, CNH, CAD, SGD, JPY, AUD, NZD Card Number |
|
|
JP MORGAN CHASE BANK, N.A. Card Number |
|
|
Wire transfer - USD - Zhou sicong Card Number |
|
 |
人民币支付 - CNY payment Card Number |
|
Other payment methods |
||
 |
||
|
Cooperation express: |
 |
Q: When will we ship after payment?
A: In order to ensure that the products we ship are in good condition. Issued approximately 1-2 days after receiving your payment.
Q: What if the product is damaged during transportation?
A: We will use a more robust package when shipping to avoid damage to the goods, and we can purchase transportation insurance in advance to reduce the loss of in the transport. although this problem is not common.
Q: What payment methods do we support?
A: We support bank transfer, wire transfer, BTC, third-party guarantee and Paypal.
Q: What should I do if there is a problem after receiving the products?
A: We have established good relationships with maintenance departments in many countries/regions in the world. For example, Venezuela, Iran, etc. If you have any questions within 3 days after receiving the goods, you can apply for after-sales service on the "My Order" page.
Q: Which express we support?
A: We will choose the cheapest and fastest transportation method for you. And we support DHL, UPS, TNT, Fedex, BRE, and also have express delivery services, such as Russia, the United States, Kuwait, etc.
[email protected] [email protected] [email protected] [email protected]
China Mainland Hong Kong 
Business Hours: (GMT+8) 08:30-20:00 Mon to Sat 
Company Phone: +86-023-72227777