KS universal hash board tester for Iceriver miner

KS hash board test fixture for Iceriver KS0 KS0pro KS1 KS2 KS3 KS3M KS3L KS5L KS5M

The KS test fixture is a tester designed for Iceriver hash board failures. Its test models include KS0, KS0PRO, KS1, KS2, KS3, KS3M, KS3L, KS5L, KS5M, etc. Using this test fixture can help us quickly detect ASIC chip failures and temperature sensor failures on the Iceriver hashboard, so as to quickly repair the hashboard. The test chip including P2SG48, P2SM88, P37P57, P38C03, P49K68, etc.

Click to view the usage tutorial: How to use the KS tester to test IceRiver hash boards?

Product advantages:

1. Applicable to a wide range of models, including most Iceriver machine models;

2. Using the KS tester, you can quickly detect ASIC chip faults, temperature sensor faults, domain voltage faults, etc., significantly reducing troubleshooting time;

3. The KS test fixture is equipped with a high-grade elegant black exquisite shell, and the cable ports around it are precise and clear, which can fully protect the internal components of the fixture from damage by dust, complex objects, short circuits and static electricity, thereby effectively extending the service life of the test fixture. At the same time, the shell is sturdy and drop-proof and is not afraid of squeezing and bumping.

4. Inside the fixture packaging, the fixture, adapter, and test cables are fixed with foam cotton to prevent shaking during transportation, which may cause the internal components of the fixture to loosen.

5. Connect the fixture and computer via USB to TTL cable to view the hash board's complete fault log.

Interface description:

When you purchase the KS tester, we will provide you more accessories, including:

In addition, to use this test fixture, we also need to cooperate with the KPS3030D power supply, cooling base 1800RPM, and other tools, including:

1) The WANPTEK KPS3030D DC power supply is used to power the Iceriver hash board;

2) The hash board cooling base 1800RPM is used to dissipate heat for the hash board.

3) The Alligator clip power cable 6mm is used to connect the KPS3030D power supply and the hash board.

Test fixture connection diagram:

① Test fixture data cable: connected to the test fixture and hash board;

② USB to TTL: connected to the tester and the computer USB port;

③ and ④ Alligator clip power cable 6mm²: connect the positive and negative electrodes of the voltage regulating power supply and the hash board respectively;

⑤ 12V adapter: provide power to the fixture.

We will not assume any responsibility for any damage caused by self-disassembly. If you have any questions during use, please consult our technicians or check the iceriver hash board maintenance manual.

KAS miner related repair tutorials:

IceRiver KS3 KS3L Hash Board Repair Guide

IceRiver KS1 KS2 Hash Board Repair Guide

IceRiver KS0 Hash Board Repair Guide