How to set fixed IP using APMiner Tool?

Computer and miners should be in the same IP range.

1. Double click to open the software.

After the miner is connected to the network and powered on, the IP obtained during the miner configuration is in DHCP mode, and the IP address is not fixed. If you own many miners, this tool can set the static IP address in batches for you to better manage these miners. The IP Range of a normal router is 1-254. If you want to set miner static IP from 1, to avoid IP conflict, it is recommended to let the router assign IP in DHCP mode from 100.

For example: Router assigns IP in DHCP mode: 101-254; Static IP for miners: 1-100.

2. You can select the static IP to be modified in "Next Fill IP," select the currency of the miner to be configured, and configure the miner's pool address, miner, and password in batches in "Mining Pool Configuration."

3. Check "Netmask," "Gateway," "DNS" in computer "Network and Sharing Center," and fill in accordingly.      

4. It is recommended to check the automatic configuration so that the miner to be configured can be automatically configured. If it is not checked, you need to manually enter the static IP to be set in "Next Fill IP," which is more convenient for automatic configuration; Press the "IP Report" button on the miner one by one for 3-5 seconds, and you can start to allocate one by one, and the static IP configuration is completed; "Simultaneous IP And Pool Config" can be checked according to the needs of miners.