Network Bandwidth and Load

The formula for calculating the number of servers and bandwidth requirements: Network bandwidth (Mbps) = number of servers (sets)/150. For example, for a hash rate center running 3,000 servers, enterprise broadband's uplink and downlink bandwidth should not be lower than 20Mbps.

There are two types of broadband currently:

1. Dedicated line, the upstream and downstream bandwidth of the dedicated line are equal, such as a 100M dedicated line. That is, both upstream and downstream is 100M. Therefore, according to the above formula, the number of miners that can be brought is about 15,000.

2. For ordinary household broadband, the uplink is generally 1/10 of the downlink. For example, 500M broadband for home use means that the theoretical downlink rate is 500Mbps, while the theoretical upload rate is generally around 50Mbps. According to this calculation, the actual number of standby is about 7500 units.