Tutorial for Lucky miner LV08 troubleshooting

Luckyminer LV08 solo lottery miners encounter common faults, timely discovery and processing can effectively avoid stopping mining due to faults, restore the normal operation of LV08, and ensure stable income for miners.

1. Miner is powered on but can not connect to WiFi

Possible causes: Using non 2.4G WiFi. WiFi name or password has special characters. The control IC is no started.

Solution: Check WiFi type, must use 2.4G WiFi (Router/Hotspot). WiFi name and password must be in English/numbers, or a combination of English and numbers. When powered on, press the reset button to reset the main control chip (1-3 times).

2. Miner is powered on, the screen and fan do not work.

Possible causes: The power cord may be loose.

Solution: Measure the power cord for poor contact, if it doesn't work after plugging and unplugging, please replace the power cord.

3. Miner is powered on, the screen does not light up and the fan works.

Possible causes: The control IC is not started.

Solution: When powered on, press the reset button to reset the main control chip (1-3 times).

4. WiFi and power consumption are normal, hash value is 0.

Possible causes: Mining pool address. Port number. Mining pool difficulty. Wallet address. Username.

Solution: Check the mining pool address carefully and query mining pool related information thttps://miningpoolstats.stream/bitcoin.

There may be multiple port numbers in the same mining pool. Generally, different port numbers. correspond to the difficulty of access. Please choose the appropriate port number.

All mining pools have a minimum access difficulty. Please ensure that the device computing power is below the mining pool access difficulty. Experience value: 500G can access a mining pool with difficulty <1000 (port number).

We must use the mainnet wallet address of the currency being mined. For example: the BTC mainnet address generally starts with 1/3/bc1.

Some mining pools require a registered account to use. For this kind of mining pool, we need to fill in the miner name of the mining pool during configuration.

5. Miner runs with low power consumption, <20w

Possible causes: The control IC is not started.

Solution: When powered on, press the reset button to reset the main control chip (1-3 times).

6. Successfully connected to WiFi, miner restarted repeatedly.

Possible causes: Mining pool resolution failed

Solution: Change mining pool.

7. Miner keeps restarting and the Hash rate is unstable.

Possible causes: WiFi congestion and instability. Mining pools are regulated. High power consumption, high temperature, high temperature protection.

Solution: Change to a stable WiFi or hotspot. Change to a locally allowed mining pool or a well-known mining pool. The environment temperature is <30℃, and the equipment should be placed in a well-ventilated place.

Detect faults promptly and find the root cause quickly. Take effective measures to restore the mining efficiency of LV08 equipment. Maintain our advantage in the competitive mining environment.

＞＞How To Setup Lucky Miner LV08 SOLO Lottery Miner?