Install method of silencer for the Iceriver KS3M miner

Installing a silencer for the Iceriver KS3M miner can help it achieve low-noise operation. The silencer can reduce noise to about 60dB with a 300*200*90mm air outlet and a pure copper core motor.

ASIC miners generate significant noise during high-speed operation, which can be disturbing for most home miners. The miner silencer can effectively solve this problem, providing a quiet and stable mining environment while helping miners dissipate heat.

So, how can we install the silencer for the Iceriver KS3M miner?

Step 1: Power off the miner, remove the protective shell of its control board, unplug the fan plug connected to the control board, and then remove the cooling fans at the air inlet and outlet of the miner;

Step 2: Insert the fan speed simulator into the fan interface of the control board;

Step 3: The miner needs to be raised by a 3-4 cm wooden board or foam board;

Step 4: Align the air inlet of the miner with the outlet of the silencer, and then fix them;

Step 5: After reinstalling the protective shell above the miner, power on the IceRiver KS3M miner and the silencer to ensure that the silencer works normally and the miner operates stably.

The above steps can help us quickly install the silencer for the ASIC miner, effectively replacing the original cooling fan. This not only significantly reduces the noise generated during the miner's operation, but also ensures that it operates efficiently and stablely. Recommended to regularly check the status of the miners to ensure its stable performance. Wishing you a better mining experience!