How to choose and replace power cord for Antminer KS5 and KS5Pro?

With the continuous advancement of cryptocurrency mining technology, miner's performance is also improving. Antminer KS5 and KS5 Pro are favored by miners for their excellent hash rate. However, miner powering demand is also constantly increasing along with high hash rate, making an higher requirements for the quality and applicability of power cords. This article will introduce in detail how to choose the right power cord for Antminer KS5 KS5pro with steps to replace the power cord quickly.

The P13 4pin plug power cable is designed for high-power miners such as Antminer KS5 and KS5Pro. It has the following characteristics:

1. Interface compatibility: It adopts a new P13 interface plug that perfectly matches the PSU interface of the miner. In addition, it supports customized lengths and various plugs (C20 / P33 / US / UK / EU / AU) to adapt to different countries and various application environments. Such as, the C20-P13 power cord is suitable for PDU with C19 interface, while the P33-P13 power cord is suitable for PDU with P34 interface.

2. High-quality material: Thicker pure copper wire cores with low resistance and high conductivity, providing efficient powering protection for miners.

3. Safe and durable: The outer shell is made of PVC environmentally friendly flame-retardant material, which is sturdy and durable, effectively preventing safety hazards such as fires.

In addition, it is also suitable for Antminer S21, S19j XP, and other miners.

Overvoltage, overcurrent, circuit aging, and repeated play-and-plug many times may damage the power cord, leading to the miner can't start normally or the faulty of miner internal components even cause fires. Therefore, once a power cord malfunction is found, please immediately replace it with a new power cord to ensure the normal operation of the miner and the safety of miners.

The specific replacement steps are as follows:

1. Power off the miner, then unplug the faulty power cord. Note: plugging and unplugging the power cord while it is powered on may damage the power supply and internal components of the miner.

2. Before replacing the new power cord, carefully inspect its appearance to ensure that there is no obvious damage such as breakage, fractures, exposed wires, etc. On the other hand, it's important to check whether the power supply and other internal components of the miner are abnormal to ensure that the power cord will not be damaged again. If necessary, replace them with new spare parts.

3. Insert the plug of the new power cord into the interface of the miner power supply, ensuring that the connection is tight.

4. Power on and restart the miner, observe its operating status and indicator lights to ensure its normal operation.

Choosing the right power cord for Antminer KS5 and KS5 Pro and replacing it correctly are important measures to ensure the normal operation of the miner and the safety of miners. It can ensure that the miner obtains stable and efficient power supply during the mining process, thereby improving mining efficiency and income.