How to use the thermal grease mold to apply grease on the Antminer KS5 ASIC chip?

Antminer KS5 hash board thermal grease mold can help Antminer KS5 hash board quickly and evenly apply thermal grease. Its holes precisely fit the hash board ASIC chip, effectively avoiding surrounding components, and can efficiently apply silicone grease to the KS5 hash board BM2382AA ASIC chip in batches, helping the ASIC chip to quickly transfer heat and have a better heat dissipation effect.

Steps for using Antminer KS5 hash board thermal grease mold：

Preparation tools: KS5 hash board, the thermal grease mold, dust cloth, cleaning agent, scraper, thermal grease.

1. Use a dust cloth and cleaner to remove any dirt or impurities from the surface of the hash board.

2. Place the thermal grease mold on top of the hash board. Note that the holes on the mold must correspond to the ASIC chip.

3. Use a scraper to evenly apply the thermal grease on the chip.

4. After the coating is completed, remove the mold. At this time, a layer of thermal grease has been evenly coated on the surface of the ASIC chip.

Note:

1. When applying thermal grease, too much or too little will affect the heat dissipation performance. Usually, the thickness of the grease we apply should be the same as the thickness of an A4 paper.

2. Make sure the grease is applied evenly without bubbles and gaps.

3. After applying, please clean the tools and molds in time to keep them clean and tidy.

The Antminer KS5 thermal grease mold makes the installation of the integrated radiator or water cooling plate easier, greatly improving our work efficiency.