After the Antminer S21 Hydro runs for a long time, the performance of the thermal grease of the hash board ASIC chip will decline, resulting in a series of failures due to poor chip heat dissipation. We can replace the thermal grease to help the ASIC chip dissipate heat better and extend its service life.
The Antminer S21 hydro grease fixture can help the ASIC chip apply the grease evenly, efficiently and quickly, so that the chip has more stable heat dissipation.
Steps to use the Antminer S21 Hydro silicone grease fixture:
Prepare tools: Antminer S21 Hydro silicone grease fixture, S21 Hydro hash board ASIC chip, dust removal cloth, cleaning agent, thermal grease, scraper
Use a dust cloth and cleaner to remove impurities from the S21 Hydro hash board.
Align the holes on the Antminer S21 Hydro silicone grease fixture to the ASIC chips and place it on top of the hash board.
Use a scraper to evenly apply thermal grease to the ASIC chips.
After the application is complete, remove the mold. At this time, a layer of thermal grease has been evenly applied to the surface of the ASIC chip.
Note:
When applying thermal grease, too much or too little will affect the heat dissipation performance. The thickness of the applied grease should be the same as the thickness of an A4 paper.
Make sure the grease is applied evenly without bubbles and gaps.
After the application is complete, please clean the tools and molds in time to keep them clean and tidy.
The Antminer S21 Hydro silicone grease fixture can help the ASIC chip dissipate heat stably, so that the S21 Hydro hash board can run normally and stably, and extend the service life of the Antminer S21 Hydro.