![ZEUS MINING](/Images/logo-index.png?v=2)
The power cord transmits electric energy from the power supply to the miner, which serves as the foundation for the miner's normal operation and plays a crucial role in guaranteeing its performance. Its quality and performance also directly affect the stability of the PSU. A quality power cable can withstand harsh environments such as high load and temperature, reducing the risk of miner shutdown or performance degradation caused by cable issues.
Whatsminer Hydro miner single-head power cable with plug is specially designed for Whatsminer water-cooled series miners. It helps the miners have normal and stable power and improve their mining efficiency. It is suitable for Whatsminer M53S++, M53S+, M53S, M33S++, M34S+, and other water-cooled series miners.
Whatsminer Hydro miner single head power cable usage steps (taking Whatsminer M53++ Bitcion Miner as an example):
1. Insert the end of the power cable with the plug into the power socket of the miner.
2. Cut off a small section of the rubber protective layer on the four wires at the other end of the power cable.
3. Remove the cut-off rubber protective layer to expose the copper wires.
4. Unscrew the bolts on the air switch and wrap the four wires in sequence into the screw holes of the air switch.
5. Finally, tighten the bolts of the air switch, and the power cable connection is complete. At this point, we only need to turn on the air switch to supply power to the miner.
The Whatsminer Hydro miner single head power cable can reduce the risk of electrical faults and line aging, thus reducing the repair and replacement costs of the Whatsminer water-cooled series miners. It can also extend the service life of the miner and create more economic benefits by reducing the downtime of the miner due to powering issues.