![ZEUS MINING](/Images/logo-index.png?v=2)
The 14AWG NEMA 5-15P to C19 power cord is used for connecting devices to North American sockets. Its C19 interface is suitable for most models of Avalonminer to provide reliable powering for the machine.
Its advantages are as follows:
1. High current ability: It supports up to 15A 125V of current, providing sufficient powering for high-power devices.
2. High conductivity: With its high-quality pure copper thickened wire cores, it has excellent arc resistance and long service life.
3. Safe and durable: The outer skin is made of new environmental-friend PVC material, which can effectively protect the wire core, ensuring insulation, wear resistance, and anti-interference.
After prolonged use, the Avalonminer's power cord may aging or breakage, leading to the machine unable to start properly or frequently shut down even serious safety hazards. Therefore, once a fault is detected, please replace a new high-quality power cord immediately to ensure the normal operation of the miner and the safety of miners.
Replacing steps for Avalon 15A 125V power cord:
1. Turn off the miner, disconnect the old power cord from the socket to ensure complete power off, then remove the plug connected to the miner's PSU.
2. Check the miner's components to confirm if the faulty power cord is caused by other issues. If necessary, replace the corresponding spare parts promptly to prevent the power cord from being damaged or burned again.
3. Check the new power cord for any damage, breaks, or exposed wires. Insert its C19 plug into the machine's power port, ensuring a secure connection.
4. Insert the NEMA 5-15P plug into the power socket, then turn on the miner to check if it is operating normally.
The power cord plays a crucial role in miners and other high-power devices, its quality and reliability directly affect the stable operation of the equipment. Timely replacement can effectively prevent potential safety hazards, then keep the miner in the best working condition.