ZEUS MINING
CRYPTO MINING PRO

Usage method for Antminer L7 dual C13 plug power cord

2024/6/12

The Antminer C13 16A to dual 10A power cord is designed for powering Antminer L7 miners. With its pure copper thickened wire core, it features resistant to plugging and unplugging, highly conductive, low-loss. Built-in power-off protection makes it safe and stable to provide reliable powering guarantee for the operation of the miner.

Antminer L7 power cord

Product specifications:

Power cord length: 1.5m

Main wire specification: 32.5mm² thickened core design to ensure stable powering transmission under high load.

Splitter wire gauge: 31.0mm², 31.31mm² (US plug only), 31.5mm²

Plug customization: This power cord supports UK, US, EU plug customization to match power sockets in different countries.

Due to the aging or damage of the power cord, the miner may encounter failures such as being unable to start normally or frequent powering outages, which will directly lead to a significant reduction in mining efficiency, further affecting the miners' stable income. It is recommended to replace the faulty power cord immediately upon discovering such issues to ensure the machine's continuous operation.

16A power cord cable for Bitmain Antminer L7

Quickly displacing steps for Antminer L7 miner C13 power cord:

1. Shut down the miner, first disconnect the old power cord from the power socket to ensure complete power-off, and then pull out the plug connected to the PSU of the miner.

2. Carefully inspect each component of the miner to confirm whether the power cord damage is caused by other potential issues. If necessary, please replace the corresponding spare parts in time to ensure the stability and safety of the entire system to prevent the power cord from being damaged again.

3. Before replacing the new power cord, carefully check it for any damage, breakage, or exposed wires. After confirmation, accurately and firmly insert the dual 10A plug of the C13 power cord into the miner's power interface.

4. Connect the main wire plug of the power cord into the power socket. Then, start-up the miner to observe its operating status, ensuring that it can work normally without abnormality.

Regularly checking the status of the power cord is essential for the stable operation of the miner. This not only ensures that the machine operates continuous and stable but also prevents potential safety risks.

Comment
Thanks for you reading, please login and leave a reply.
0
About products purchase, please contact our sales manager:
[email protected]

About miner repair and after-sale issues, please contact the repair manager email:
[email protected]

For business cooperation, please contact:
[email protected]

COMPLAINTS & SUGGESTIONS
If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
[email protected]
Attention!

Recently, many companies claiming to be mining companies imitate us and say that they are related to us, or that they are our branch companies, which has caused customers to be deceived. Please be careful not to believe any impostors, please check our correct contact information and beware of being deceived getting scammed, and losing money.
please check our right contact way: Here

CLOSE