In the complex process of cryptocurrency mining, the hash board is responsible for performing heavy hashing operations, which directly determines the mining efficiency and performance of the machine. Antminer S19+ hash board replaces the failed one, helping miners quickly resume normal operation.
Factors such as overheating due to prolonged operation, unstable voltage, and aging wear can damage hash boards. If miners experience a low hash rate or 0 hash rate, it may be caused by faulty hash boards. Replacing a new one is the best choice to solve this problem, ensuring that miners continue to operate efficiently and stably, avoiding further losses by reducing downtime.
The specific replacement steps of the Antminer S19+ hash boards are as follows:
Remove the damaged hash board
1. Before replacing the hash boards, turn off the machine and disconnect the power cord from the power socket to ensure safety.
2. After removing the protective cover plate on the top of the miner, unplug the fan plugs, unscrew the fixed screws of the conductive copper sheets and the outlet fan to remove them.
3. Carefully disconnect the cables connected to the control board, and then gently remove the faulty hash board from the miner case.
Install the new hash board
1. Carefully inspect the appearance of the new S19+ hash board to ensure that its circuit has no issues such as short circuits or open circuits.
2. Align the new S19+ hash board with the slots of the miner case, then slowly push it into its original position. Connect the cables between the hash board and the control board, ensuring that the connections are secure.
3. Reinstall the previously removed conductive copper sheets and cooling fans, then connect the fan plugs to the fan interface of the control board.
4. After ensuring that all connections are secure, reinstall the protective cover plate over the control board, then tighten them with fixing screws.
Running test
Connect the miner's power cord to start it. Check its operating status through the backend interface of the miner to ensure that the hash rate has returned to normal levels.
Note: During the operation, please wear anti-static gloves at all times to avoid damaging the miner.
For any miner, maintaining the good working conditions of the hash board is crucial to ensure mining revenue. Promptly replacing faulty ones not only guarantees the stable operation of the machine but also ensures that miners maintain a leading position in the fiercely competitive mining market.