When we only have 110V power available, but the electronic equipment needs to run in a 220V voltage environment, the mini power transformer can provide the necessary voltage conversion function.
Through the adjustment of the mini power transformer, the 110V power supply can be safely and stably converted to 220V to meet the voltage requirements of the equipment. It is often used in desoldering stations, electric soldering irons, hot air guns and other equipment that use 220V voltage.
Product introduction:
The shell is made of all metal and the internal transformer is made of pure copper.
The maximum load is 3000W.
The applicable voltage is 110V to 220V.
Steps to use the mini power transformer:
First confirm whether the electronic device to be used requires 220V voltage to work properly. This can usually be found in the manual or label of the device.
Let's take a 220V desoldering station as an example.
Plug the power cable of the mini power transformer into the power socket.
Then connect the power cord of the 220V desoldering station to the output of the mini power transformer.
Turn on the switch of the mini power transformer and then start the desoldering station.
If the desoldering station can be used normally, it means that the mini power transformer has successfully converted the voltage to the 220V voltage required by the desoldering station.
Note:
When using the mini power transformer for the first time, power on the transformer for ten minutes before connecting it to the electronic device.
When using the transformer, pay attention to heat dissipation and ventilation to avoid high temperature and humid environment.
Do not cover the heat dissipation window on the side of the transformer.
The mini power transformer cannot be used for a long time, otherwise it will cause it to overload and heat up, shortening the service life of the transformer.
The mini power transformer can provide a stable output voltage through its internal circuit design and protection mechanism, and prevent damage to electronic equipment due to voltage fluctuations or current shocks. The mini power transformer is small in size and light in weight, making it easy to carry and store. In addition, it also uses efficient power conversion technology to reduce energy loss and improve the efficiency of power supply.