ZEUS MINING
CRYPTO MINING PRO

What is the Iceriver KS0 KS0Pro PSU and how to replace it?

2024/7/11

IceRiver KS0 KS0pro PSU is a high-performance power supply with advanced temperature management functions, aiming to optimize the performance of the KS0 system. It has a C6 input interface and a DC 5.5x2.5 output interface, providing reliable powering for miners' stable operation.

KS0 miner replacement power supply

Advantages of KS0 KS0pro PSU:

1. Stable powering output: It can output 90W 19V 4.74A to meet the stringent requirements of the KS0 system.

2. Wide voltage and frequency range: Its input range is 100-240V 50-60Hz, compatible with various electrical systems.

3. Wide temperature operating range: Stable operation within the temperature range of 0-40℃, which can maintain the optimal temperature level for optimal performance.

4. Advanced temperature management function: Protects the KS0 system from overheating, ensuring efficient operation of the machine and extending the service life of sensitive electronic components such as motherboard, CPU, and GPU.

The KS0 KS0pro miners are favored by mining enthusiasts due to their low power consumption and high energy efficiency ratio. However, continuous mining work can gradually lead to aging or wear of its components. If the miner experiences abnormalities such as unable to start, sudden power down or frequent reboots, it may be caused by the power supply failure. To ensure the stable operation of the miner for ensuring the miner's income, we're recommended to replace the faulty power supply immediately.

Iceriver KS0 KS0Pro PSU change

Here are the specific replacing steps to the IceRiver KS0 PSU:

1. Turn off the miner, disconnect the power cord from the power outlet.

2. Unplug the plugs connected to the output and input terminals of the PSU, then remove the faulty power supply.

3. Check the cables connected to the power supply for any peeling or damage, please replace them with new ones if necessary.

4. After checking that the appearance of the new power supply is intact, connect the previously unplugged cables, ensuring that the connections are secure.

5. Power on to restart the miner, check if its operation is normal to ensure that the new PSU can provide stable powering.

In mining operations, the power supply not only bears the important task of providing stable powering to the miner, but is also the cornerstone of the continuous and safe operation of the entire mining system. Therefore, we need to pay attention to the status of it at all times, if necessary, replace it promptly to avoid further losses.

Comment
Thanks for you reading, please login and leave a reply.
0
About products purchase, please contact our sales manager:
[email protected]

About miner repair and after-sale issues, please contact the repair manager email:
[email protected]

For business cooperation, please contact:
[email protected]

COMPLAINTS & SUGGESTIONS
If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
[email protected]
Attention!

Recently, many companies claiming to be mining companies imitate us and say that they are related to us, or that they are our branch companies, which has caused customers to be deceived. Please be careful not to believe any impostors, please check our correct contact information and beware of being deceived getting scammed, and losing money.
please check our right contact way: Here

CLOSE