Iceriver KS3M KS3L conductive copper bars are essential components connecting the BP-H-3640 PSU to the hash boards. Made from high-quality pure copper, they exhibit exceptional conductivity and strong antioxidant properties, ensuring efficient transmission of large currents, which provide stable power support for the efficient operation of miners.
Once the conductive copper bars are damaged, the miner will not be able to start, which will directly affect the mining revenue. In this case, it is imperative to replace it immediately, restoring the machine's operation quickly to avoid further losses due to prolonged downtime.
Here is the replacement method for Iceriver KS3M PSU conductive copper strip (also applicable to the KS3L miner):
1. Power off the miner, disconnect the power cord from the socket. Notice: allow the machine to cool before proceeding.
2. Remove the protective cover plates above the control board and power supply, then dismantle the fixing screws of the faulty conductive copper sheet to remove it.
3. Inspect the new KS3M conductive copper sheet for any visible damage, next, align it with the original holes, and tighten its fixing screws.
4. Install the previously removed protective cover plates to their original position, completing the replacement of the conductive copper sheet.
5. Power on the miner to observe its operating status.
In the pursuit of efficient and sustainable mining, the Iceriver KS3M KS3L PSU conductive copper bars provide a solid foundation for miners with their superior performance and reliable quality.