HY234 Hash board thermal grease thermal putty 4.0W/mk 100g

HY234 Thermal Putty

Rapid CPU surface conduction cooling thermal grease What is thermal grease? Thermal grease, also called thermal paste, is a high thermal conductivity silicone insulating material. The product also has low oil separation (tends to zero), high and low temperature resistance, water resistance, ozone resistance, and weathering resistance. It can maintain the grease state when used for a long time at a temperature of -50~+300℃. Between heat dissipation and heat conduction, even two planes with very smooth surfaces will have gaps when they come into contact with each other, and the conductors in these gaps will hinder the conduction of heat to the heat sink. Thermal grease can fill these voids, making heat transfer more smoothly and quickly to the material. Thermal grease has high thermal conductivity, excellent thermal conductivity, wide operating temperature, good use stability and good construction performance, which can effectively reduce the CPU temperature of the miner's graphics card, and ensure the smooth operation and use life of the mining rig. When the CPU chip is used at a working temperature of -50~300℃ for more than half a year, it is necessary to re-apply thermal grease to prevent the thermal paste from drying out, resulting in performance degradation, the inability to heat conduction or temperature accumulation. 

Product parameters:

Product name: HY234-CN100

Color: pink

Concentration: 300+101/10mm

Thermal conductivity: >4.0W/m-k

Instantaneous temperature resistance: -50~340°C

Thermal Impedance: <0.028C-in/w

Working temperature: -50~200°C

Specific gravity:>2.75g/cm³

Net weight: 100g / 1000g

Due to the pastes and liquids are sensitive goods and their transportation is restricted, this product will be shipped separately using sensitive goods channels, and the delivery time will be slightly longer 8 to 20 working days.

Scope of application of thermal grease:

The CPU graphics processor, notebook and desktop computers, modules with high thermal conductivity, automotive headlight control, cooling devices, power conversion equipment, network communication equipment, electronic components, etc.

How to use:

(Pay attention when smearing: apply evenly, without impurity bubbles; do not apply too thick, do not overflow is better)

1. Wipe the CPU surface clean to remove rust, dust, and oil

2. Squeeze some thermal grease on the center of the CPU surface

3. Spread the thermal grease with a scraper or brush

4. Apply the thermal grease evenly as the thickness of the paper

Related product:

HY234 Hash board thermal grease 110g 4.0W/mk

GD900-1 thermal grease 6.0W/MK 1000g

MT-3208 Thermal grease 8.5W/MK 200g

Manual push glue gun