Antminer hash board code editor

Antminer hash board code editor
1-5 330
5-10 320
>11 310


Get Quote Via WhatsApp
If you dont know how to place an order please check our FAQs

WhatsApp : +8618623251355
Notice!
Recently, Our customers have reported that someone pretending to be our customer service staff. Please pay attention to the phone number above which is the only WhatsApp of Zeus mining ltd. Any other contact way not on our website was not our responsibility. If you find someone else pretending to us, please email the screenshots to [email protected] immediately and terminate the transaction to avoid loss.
Product description:

Antminer hash board code editor for not hashing zero hash rate or 0 hash rate hash board not working chain has 0 ASIC no red light after Antminer hashing board replacement.

When the Antminer hash board is not working and there is no hash, we can use the Antminer hash board code editor to solve this problem. How to use the Hashboard code editor? The principle of this device is to synchronize the hash boards with different serial numbers inside the miners to make them the same as the other two hash boards, so that the miners can start and work normally. This code editor is suitable for Antminer S9SE S9k S11 S15 T15 S17 S17 + S17pro S17e S17+ T17 T17e S19 S19pro and other subsequent models of hash board repair and synchronization problems. Our method is to read one of them and save the data, and then write the data to the other hash board. After rigorous testing, this method is fast and effective.

hash board code editor for Antminer S9se S9k

Can solve the problem of hash board mixing failure Antminer  S9se S9k S11 S15 T15 S17 T17 S17+ T17+ S17e T17e S17pro S19 S19pro. 

The product can complete the work without a computer

Equipment voltage:  5V 1-2A

Applicable models:  Antminer S9SE  S9k  S11  S15  T15  S17  S17+  S17pro  S17e  S17plus  T17  T17e  S19   S19pro and other subsequent models.

Working mode:  RW simulation program

Power supply:  USB power supply

Scope of application:  fix the failure of the miners to start normally due to the mixed use of hash boards or the sweep of the test fixture.

best code editor suitable for S11 S15 T15

- "OK" confirmation key

 - "NF" function key

 - Up button

 - Down button

 - Left button

 - Right button

 - USB power interface (5V 1-2A)

 - Hashboard data interface

Sometimes when we use the hash board from different miners in one, or after using the test fixture to test, the miner probably can't start working, it's because the code in the hash board is not unified, we need special equipment to refresh the code, the machine can restart work.

Note: This problem doesn't hardware damage, but because the Hash board code is not uniform, This special code has been written into the hash board at the factory, and this problem probably occurs when repairing S9SE  S9k  S11  S15  T15  S17  S17+  S17pro  S17e  S17plus  T17  T17e  S19   S19pro  and other subsequent models.

hash board code programmer for S17 series

When we mix the hash board from two different Antminer s9se miners.

The miner can't recognize the new hash board, it will causing the miner can't start and not working.

Now we use this special code editor, to edit the code to make it the same as other hash boards in order to work properly.

Editor available for Antminer T17 T17e

First, we need to read the data of one of the hash boards, and save it in the device.

Then, write the newly added hash board to the same code.

Now. their internal code is consistent,The miner can be mining again now.

Note: According to our statistics, about 62% of miners will experience this problem after repairing or changing the hash board. not 100% will happen.

If you have any questions that you don’t understand during use, please click on how to use the Hashboard code editor, or consult our account manager.

The best hash board code editor

Hashboard editor available for S19 S19pro

S19,S19pro file support will be updated in the future, please contact customer service staff to obtain.

Related video principle tutorials and instructions:

Click to view Youtube video tutorial

Related maintenance tools:

Antminer New version of multi-function test fixture

Official thermoset gel 220g

BM1387 tin tool, high temperature resistant composite material

related articles:

Solution of mixed hashboard miner error

Antminer S9se S9k S11 S15 T15 S17 T17 S17+ T17+ S17E T17E Reasons for not starting

Click to see more miner maintenance tools

Quality assurance
All products are from official factories
Fast shipping
Shipped within 2-3 working days after accepting the order
Enhanced packaging
New miners use original packaging and strengthen peripheral packaging
Multiple modes of transportation
Support air, ship and designated special line transportation
Pyament method:

How to determine product prices and shipping costs?

When you are ready to buy one or more products. You can consult the sales Manager to get a sample of the proforma invoice. The category, product price, and freight are included.

How to complete the payment?

We have the following payment methods. You can tell our sales Manager which payment you prefer and complete it. After the customer service checks and confirms the payment is completed. Provide the proforma invoice. And we will prepare to ship.

Cryptocurrency Payment

The payment method at the designated address is efficient and practical and can be used anywhere in the world.
Wallet Address
The payment method at the designated address is efficient and practical and can be used anywhere in the world.

Wallet Address

Bank Transfer

Other payment methods

Wire transfer [Hong Kong]
Card Number
Wire transfer [China Mainland]
Card Number

Cooperation express:

Q: When will we ship after payment?
A: In order to ensure that the products we ship are in good condition. Issued approximately 3 days after receiving your payment.

Q: What if the product is damaged during transportation?
A: We will use a more robust package when shipping to avoid damage to the goods, and we can purchase transportation insurance in advance to reduce the loss of in the transport. although this problem is not common.

Q: What payment methods do we support?
A: We support Bank transfer, wire transfer, Western Union, BTC, third party guarantee, letter of credit and Paypal.

Q: What should I do if there is a problem after receiving the products?
A: We have established good relationships with the maintenance departments in many countries around the world. For example Venezuela, Iran, etc. If you have any questions within 3 days of receiving the goods, you can get free repair service.

Q: Which express we support?
A: We will choose one cheapest and fastest transport way for you. and we support DHL, UPS, TNT, Federation, also have special express, such as Russia, the United States, Kuwait, etc.

More FAQs

If you have any questions, please leave us a message.
Leave message



mona 31/3/2021 15:32:15
Q:i want bau bitcoin mining macin 
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.
https://www.zeusbtc.com/FAQ.asp
Tim T 30/3/2021 20:43:33
Q:Do you have any APW8 PSU's for DR5 8-9v? Thank you
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
Raul Pop 27/3/2021 16:27:28
Q:Hi.
Do you have s9 on stock?
Tx
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
Vadim Tsvetikov 27/3/2021 4:00:57
Q:Hello!
Our company - Burfa Tech want to clarify the availability of miner equipment:
Antminer S19 95T,  
Antminer S19PRO 110T 
Antminer Т19 84T 
WhatsMiner M30s
WhatsMiner M30+ / M30++
Avalon 1246 85T
Quantity - 500pc ASAP , 6000+ end of summerr
We are also interested in buying spare parts for Antminers S17 and S19.
Thank You in advance,
Vadim Tsvetikov
Burfa Tech
Data Center Operational Director
P: +372 5143576
E: [email protected]
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
Moustafa 24/3/2021 5:01:18
Q:What’s the price control board for Ebang Ebit 10.3
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
jann carlos rangel 22/3/2021 3:23:14
Q:buenas tardes que precio tiene la t17e
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
Alex Joseph 22/3/2021 0:33:43
Q:I am interested in prices on used BTC miners.
Please advise on models and price. 
Shipping to western Canada.
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
ไพฑูรย์ แซ่ซื้อ 21/3/2021 20:44:24
Q:Interested to buy
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
Tapan Kumer Modak 18/3/2021 18:38:45
Q:pls send us ur WhatsApp Number
A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
Achim Rüdinger 16/3/2021 7:02:53
Q:Hi
How much would I have to pay for 1 S17+ shippment to Germany? Is it in stock?
THX

Achim Rüdinger

A:Dear Sir/Madam, please refer to our FAQ or contact us for Pre-sale service via whats app. Thank you.


https://www.zeusbtc.com/FAQ.asp
TRC20


COPY

ERC20


COPY

OMNI


COPY
0
About products purchase, please contact our sales manager:
[email protected]

About miner repair and after-sale issues, please contact the repair manager email:
[email protected]

For business cooperation, please contact:
[email protected]

COMPLAINTS & SUGGESTIONS
If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
[email protected]