| Unit Price: | $ 128 |
WhatsApp : +8619123969125
Telegram : @zeusmining_presalesFNIRSI-1013D Digital Tablet Oscilloscope Dual Channel 100M Bandwidth 1GS Sampling Rate Mini Tablet Digital Oscilloscope
Click on article "What role does the FNIRSI-1013D oscilloscope play in repairing ASIC miner hash board?" to view more information about this product.
Features:
Screen: Fully fitted 7 "800*480 resolution color TFT LCD display, bright color, high contrast; The touch is a capacitive touch screen, just like a pad touch on a modern mobile phone, not a resistive touch screen operated by an ancient fingernail
Dual input: Has two input channels, the input impedance of 1 m ohm, can measure 2 different set of signals at the same time, to the input signal in the 2 groups were compared to judge to analyze problems, such as power amplifier unit of input and output signal of the contrast analysis to test the character of magnification and distortion degree, and the output resistance, full bridge or half bridge switching power supply complementary PWM signal test, such as relative to single channel has more extensive applicability
Intelligent anti-burning: the two input channels have built-in high-voltage protection modules, which can tolerate up to 400V voltage input. There is no need to worry about the loss of oscilloscope caused by the probe not being moved to 10x position due to the high voltage measurement
Complete trigger function: with automatic, single, normal three trigger modes, single trigger mode to test the sudden aperiodic burst signal, such as the car ignition signal;Normal trigger mode to test aperiodic digital logic signals, such as infrared remote control signals;Automatic trigger mode test cycle analog signal, such as sinusoidal signal;Wide range of uses
One-key: Automatic adjustment does not need tedious manual adjustment, one-key automatic adjustment;The adjusted waveform appears in the center of the screen (when the dual channels are started, channel 1 is in the top half of the center, and channel 2 is in the bottom half of the center). The time used is short. It takes only 1 second to automatically adjust the signal of 1V peak and peak value, while it takes about 5 seconds for a typical desktop oscilloscope.The larger the range of the measured signal, the shorter the adjustment time
Note: The project will send the English version by default
Specification
Material: Plastic, electronics
Color: Black
Size(L x W x H): About 184mm x 124mm x 50mm
Model: FNIRSI 1013 d
Maximum test voltage: 1x:40V 10X: 400V
Channel number: 2
Cursor type: horizontal x, horizontal Y, trigger Y
Screen size :7"
Battery: 6000mah rechargeable battery(built in)
Scrolling mode: supported
Screen resolution :800 x 480
One-click AUTO: support
Display process :TFT
Waveform storage: 11,000 screenshots + 1,000 sets of waveform
Analog bandwidth :100MHz
Waveform manager: supported
Maximum sampling rate :1GS/s
Voltage accuracy :± 2%
Time of rise :< 3ns
Frequency accuracy :± 0.01% accuracy
Storage depth :240Kbit
Measurement parameters: a total of 12
Input impedance :1MQ
Vertical sensitivity: 50mv-500v
Standby time :4 hours
Time base range :50S 10ns
Extended interface :USB transfer interface
Trigger mode: single/normal/automatic
Charging requirements :5V 2A/3A/4A
Trigger edge: rising edge/falling edge
Coupling mode: AC/DC
Package included:
1pc x oscilloscope
2pcs x matched 100MHz probe (1X and 10X)
1pc x USB data cable
1pc x user manual (English)
Related maintenance tools:
FNIRSI DSO-TC3 3 in 1 handheld digital oscilloscope transistor tester
1014D Dual Channel Oscilloscope
Payment method:
How to determine product prices and shipping costs?When you are ready to buy one or more products. You can consult the sales Manager to get a sample of the proforma invoice. The category, product price, and freight are included. |
||
How to complete the payment?We have the following payment methods. You can tell our sales Manager which payment you prefer and complete it. After the customer service checks and confirms the payment is completed. Provide the proforma invoice. And we will prepare to ship. |
||
Cryptocurrency Payment |
||
 |
Bitcoin - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
USDT - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
ETH - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
LTC - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
 |
USDC - The payment method at the designated address is efficient and practical and can be used anywhere in the world. Wallet Address |
|
Bank Transfer |
||
 |
Wire transfer - USD - SeaTree Card Number |
|
|
Wire transfer - USD, EUR, GBP, HKD, CNH, CAD, SGD, JPY, AUD, NZD Card Number |
|
|
JP MORGAN CHASE BANK, N.A. Card Number |
|
|
Wire transfer - USD - Zhou sicong Card Number |
|
 |
人民币支付 - CNY payment Card Number |
|
Other payment methods |
||
 |
||
|
Cooperation express: |
 |
Q: When will we ship after payment?
A: In order to ensure that the products we ship are in good condition. Issued approximately 1-2 days after receiving your payment.
Q: What if the product is damaged during transportation?
A: We will use a more robust package when shipping to avoid damage to the goods, and we can purchase transportation insurance in advance to reduce the loss of in the transport. although this problem is not common.
Q: What payment methods do we support?
A: We support bank transfer, wire transfer, BTC, third-party guarantee and Paypal.
Q: What should I do if there is a problem after receiving the products?
A: We have established good relationships with maintenance departments in many countries/regions in the world. For example, Venezuela, Iran, etc. If you have any questions within 3 days after receiving the goods, you can apply for after-sales service on the "My Order" page.
Q: Which express we support?
A: We will choose the cheapest and fastest transportation method for you. And we support DHL, UPS, TNT, Fedex, BRE, and also have express delivery services, such as Russia, the United States, Kuwait, etc.
[email protected] [email protected] [email protected] [email protected]
Dear Customers,
Hello everyone, as China is about to usher in the Spring Festival, international logistics will be suspended. Zeus Mining is scheduled to stop shipping on January 18, 2025, and start the Spring Festival holiday from January 21 to February 4, 2025 (GMT+8). Pre-sales and after-sales service will reply to the information on February 5, 2025, and shipping will resume on February 8, 2025. Thank you for your support and trust in 2024. In 2025 and the future, we will bring better products and services to our friends.
Best wishes,
ZEUS MINING CO., LTD
China Mainland Hong Kong 
Business Hours: (GMT+8) 08:30-20:00 Mon to Sat 
Company Phone: +86-023-72227777
