Miner normal operating temperature range

What is the miner operating temperature?

The operating temperature range of the miner is 0-40 °C without the influence of other factors, but in reality, various factors may reduce this range, such as dust, humidity, etc., so it is recommended that the miner farm temperature be controlled between 15-35 °C. In general, 25°C is the best.

How to clean and dust my miner >

Different models display the miner's temperature differently. Notably, most of our miners have a protection program that puts the miners shut down at temperatures too high.

Judgment and solution for high-temperature protection of Antminer >

Below shows the normal temperature of the miners:

Antminer	Temperature in degree Celsius
S9 series excl. S9i, S9j, S9-Hydro	Range: 65 - 115 Chip max. 135 PCB max. 90
S9i	PCB max. 85
S9j and S9-Hydro	PCB max. 95
T9 series excl. T9+	Range: 65 - 115 Chip max. 135 PCB max. 90
T9+	Chip max. 125 PCB max. 95
L3	Range: 30 - 85 PCB max. 85
L3+ and L3++	Range: 30 - 85 PCB max. 90
D3	Range: 35 - 80 PCB max. 85
D5	PCB max.85
A3	Chip max. 115 PCB max. 85
X3	Chip max. 127 PCB max. 80
B3	Chip max. 127 PCB max. 80
V9	Range: 30 - 70 PCB max. 80
Z9 Mini	Chip max. 125 PCB max. 80
Z9	PCB max. 80
E3	PCB max. 65
DR3/DR5	PCB max. 85
S15	PCB max. 80
S11	PCB max. 95
T15	PCB max. 80
S17/S17 Pro/T17	PCB max. 75
S9 SE/S9k	PCB max. 85
S17e/T17e/S17+	PCB max. 80
T17+	PCB max. 75
S19/T19/S19 Pro	PCB max. 80
S19j Pro	PCB max. 85
Z15/Z15j/Z15e	PCB max. 80
K5	PCB max. 80
B7	PCB max. 75

Note:

1. The temperature of some miner is displayed as Temp (chip1) and Temp (chip2), where chip1 is the temperature of the PCB and chip2 is the chip's temperature.

2. The temperature scanned by the BTC bulk management tool is the PCB temperature.

If you notice that the temperatures are climbing and nearing the temperature limit, contact us for assistance and technical advice.

Categories

Miner normal operating temperature range

About

PRODUCTS

SUPPORT

INFO