​Avalon A741

Avalon A741 uses 88 A3212V chips, and the hash rate of the whole miner reaches 7.3T, Power consumption is 1150W. The new sixth-generation A3212V chip adopts the SHA-256 algorithm and is manufactured in a 16nm process. There is no need to set frequency, voltage, and fan during operation. As long as the mining pool and network are set on the MM interface, the miner will automatically adjust and run. The use of an aluminum shell, aluminum hash board, and double-layer heat sink can achieve the best heat dissipation effect. In addition, 8 6PIN power interfaces and independent power modules can reduce the damage to the power interface, thereby reducing the miner repair rate. With a dash panel attached to the unit's fan, the purpose of which is to guide and better direct the air out of the rear of the unit, such a standard fan simply bolts to either side of the miner. What's great about the Avalon 741 is that it performs well and manages not to deviate too far from the actual output specified. With such great build quality and great work output, you can't go wrong with the Avalon 741. And it has a longer lifespan.

Parameters：

Model: AvalonMiner 741

Also known as Avalon A7

Size: 136 * 150 * 320mm

Chip name: A3212

Chip size: 16nm

Chip count: 88

Noise level: 65db

Fan(s): 1

Power: 1150W

Wires: 6 * 6pins

Voltage: 12 - 12.6V

Interface: AUC3 - RJ45

Temperature: -5 - 40 °C

Humidity: 5 - 95 %