NT5CC128M16IP-DI

NT5CC128M16IP-DI is a DDR3 memory chip on the S9 control board, which can realize high-speed operation. It is internally configured as eight banks of DRAM. 2Gb chips are organized as 32Mbit x 8 I/O x 8 bank or 16Mbit x 16 I/O x 8 bank devices. These synchronous devices enable high-speed double data transfer rates up to 1866Mb/sec/pin for general-purpose applications.

The chip is designed to meet all key DDR3(L)DRAM key features, and all control and address inputs are synchronized to a pair of externally supplied differential clocks. The inputs are latched at the crossing points of the differential clocks (CK rising and CK falling). All I/Os are source synchronous with single-ended DQS or differential DQS pairs.

Product feature:

• Compliant with JEDEC DDR3

- 8n prefetch architecture

- Differential clock and data strobe

- Double Data Rate on DQ, DQS and DM

• Data integrity

- Automatic Self-Refresh (ASR)TS with built-in DRAM

- Auto Refresh and Self Refresh Mode

• Power saving mode

- Partial Array Self Refresh (PASR)

- power down mode

• Signal integrity

- Configurable DS for system compatibility

- Configurable on-chip termination

- ZQ calibration for DS/ODT impedance accuracy via external ZQ pads (240 ohms ±1%)

• Signal synchronization

- write leveling via MR settings

- read leveling via MPR

• Interface and power supply

- SSTL_15 for DDR3: VDD/VDDQ=1.5V(±0.075V)

- SSTL_1353for DDR3L: VDD/VDDQ=1.35V(-0.067/+0.1V)

Related product:

Antminer S9 Control Board Spare Parts Kit BOM List