The TS1200A 120W soldering iron station is an intelligent lead-free desoldering station. It can solder electronic components, often used in the maintenance of the hash board and control board of the miner.Product paramet...
2024/6/18
When maintenance technicians are repairing ASIC miners, solder wire can assist the electric soldering iron to solder electronic components (ASIC chips, resistors, capacitors, LDO chips, etc.) on the hash board or control...
2024/6/18
DK-309Bi lead-free low-temperature solder paste is an indispensable solder material for repairing ASIC miner hash boards and control boards. Its low-temperature characteristics can reduce the required soldering temperatu...
2024/6/17
The Avalon test fixture is designed for the Avalon series of miners, such as 1066Pro, 1166, 1166Pro, 1246, 1246Pro and other models, including testing A3204 series, A3203 series, A3202 series ASIC chips. It is a professi...
2024/6/17
The Whatsminer 4pin fan speed simulator allows for testing the heat dissipation effects of different fan speeds on miners, optimizing the cooling system, enhancing performance and reliability, and indirectly reducing the...
2024/6/17
861X 1300W rework station is a powerful hot air desoldering rework station, mainly used for the disassembly and soldring of BGA chips on Antminer Z15 series, E9, E9pro etc. hash board.861X 1300W hot air rework station fe...
2024/6/17
FNIRSI-1013D oscilloscope is a flat digital oscilloscope with dual channels, 100MB bandwidth and 1GS sampling rate. When we repair the hash board, we can use FNIRSI-1013D oscilloscope to test the signal waveform of ASIC ...
2024/6/7
The 1000x electronic digital magnifier with a 4.3-inch screen is a repair tool for repairing small circuit boards such as ASIC miner hash boards, control boards, and mobile phone motherboards.Features of the electronic m...
2024/6/7
When we are repairing the Antminer S19, T19, S19pro, S19XP, KA3, D7, L7 hash board, if some components of the boost circuit cannot be repaired or are damaged, we can install the Antminer 18V boost module to replace the o...
2024/6/7
When the Antminer S19XP Hydro has poor heat dissipation, it may be because the thermal grease on its ASIC chip has dried up. This situation may cause poor heat dissipation of the miner at the least, or even damage the ha...
2024/6/7
[email protected] [email protected] [email protected] [email protected]
Dear Customers,
Hello everyone, as China is about to usher in the Spring Festival, international logistics will be suspended. Zeus Mining is scheduled to stop shipping on January 18, 2025, and start the Spring Festival holiday from January 21 to February 4, 2025 (GMT+8). Pre-sales and after-sales service will reply to the information on February 5, 2025, and shipping will resume on February 8, 2025. Thank you for your support and trust in 2024. In 2025 and the future, we will bring better products and services to our friends.
Best wishes,
ZEUS MINING CO., LTD
China Mainland Hong Kong 
Business Hours: (GMT+8) 08:30-20:00 Mon to Sat 
Company Phone: +86-023-72227777